Home > Overhead Conductors > AAC – All Aluminum Conductors BS EN 50182 (UK)

AAC – All Aluminum Conductors BS EN 50182 (UK)

Application

Classes AA and A are used primarily for overhead transmission and primary and secondary distribution, where ampacity must be maintained and a lighter conductor (compared to ACSR) is desired, and when conductor strength is not a critical factor. Classes B and C are used primarily as bus, apparatus connectors and jumpers, where additional flexibility is required.

Specifications

BS EN 50182 Conductors for overhead lines — Round wire concentric lay strandedconductors

Note:We also can produce based on other international standards, such as IEC、ASTM、AS etc.

Construction

Hard-Drawn aluminum wires, concentrically stranded

Send Email

Chat Now

Code	Old code	Area	No.of wires	Diameter		Mass Per Unit Length	Rated Strength	DC Resistance
Code	Old code	Area	No.of wires	Wire	Cond.	Mass Per Unit Length	Rated Strength	DC Resistance
		mm2		mm	mm	kg/km	kN	Ω/km
23-AL1	MIDGE	23.3	7	2.06	6.18	63.8	4.2	1.2249
27-AL1	GNAT	26.9	7	2.21	6.63	73.4	4.83	1.0643
37-AL1	MOSQUITO	36.9	7	2.59	7.77	100.8	6.27	0.7749
43-AL1	LADYBIRD	42.8	7	2.79	8.37	117	7.28	0.6678
53-AL1	ANT	52.8	7	3.1	9.3	144.4	8.72	0.5409
64-AL1	FLY	63.6	7	3.4	10.2	173.7	10.49	0.4497
74-AL1	BLUEBOTTLE	73.6	7	3.66	11	201.3	11.78	0.388
79-AL1	EARWIG	78.6	7	3.78	11.3	214.7	12.57	0.3638
84-AL1	GRASSHOPPER	84.1	7	3.91	11.7	229.7	13.45	0.34
96-AL1	CLEGG	95.6	7	4.17	12.5	261.3	15.3	0.2989
106-AL1	WASP	106	7	4.39	13.2	289.6	16.95	0.2697
106-AL1	BEETLE	106.4	19	2.67	13.4	292.4	18.08	0.2701
132-AL1	BEE	132	7	4.9	14.7	360.8	21.12	0.2165
158-AL1	HORNET	157.6	19	3.25	16.3	433.2	26.01	0.1823
186-AL1	CATERPILLAR	185.9	19	3.53	17.7	511.1	29.75	0.1546
213-AL1	CHAFER	213.2	19	3.78	18.9	586	34.12	0.1348
238-AL1	SPIDER	237.6	19	3.99	20	652.9	38.01	0.121
266-AL1	COCKROACH	265.7	19	4.22	21.1	730.4	42.52	0.1081
323-AL1	BUTTERFLY	322.7	19	4.65	23.3	886.8	51.63	0.0891
373-AL1	MOTH	373.1	19	5	25	1025.3	59.69	0.077
372-AL1	DRONE	372.4	37	3.58	25.1	1027.1	59.59	0.0774
415-AL1	CENTIPEDE	415.2	37	3.78	26.5	1145.1	66.43	0.0695
486-AL1	MAYBUG	486.1	37	4.09	28.6	1340.6	77.78	0.0593
530-AL1	SCORPION	529.8	37	4.27	29.9	1461.2	84.77	0.0544
628-AL1	CICADA	628.3	37	4.65	32.6	1732.9	100.54	0.0459

Application and case display

FAQ

How do you calculate the minimum bending radius of cables?

What are the weight limits for different types of packages?

What is the minimum order quantity for the product?

What is the service life of cables?

What is the validity period for the offer of cable?

How do you calculate the minimum bending radius of cables?

The bend radius refers to the curved shape in which an electrical cable can be bent or curved without sustaining damage. To determine the minimum bend radius for cables, apply the following formula: Minimum Bend Radius = Cable Outer Diameter×Cable Multiplier. For example, if the outer diameter of a cable is 20mm, its minimum bending radius would be 20mm×6 = 120mm. Conversely, if an armored cable has an outer diameter of 30mm, its minimum bending radius would be 30mm×12 = 360mm.

What are the weight limits for different types of packages?

The weight limit for a wooden drum or steel wooden is 5,000 kg, and for a steel drum, it is 10,000 kg.

What is the minimum order quantity for the product?

The minimum order quantity for low and medium voltage cables is 200 meters, whereas for high voltage cables, it is 2000 meters. Should the order quantity fall below the MOQ, however, if the factory has stock, we can still supply it.

What is the service life of cables?

The design life of power cables is typically 20 to 30 years; however, this can vary significantly based on factors such as installation, environmental conditions, and the quality of the cable.

What is the validity period for the offer of cable?

Typically, the offer is valid for 7 to 30 days, and the price will be adjusted according to the cost of raw materials and the exchange rate.