Home > Medium Voltage Power Cables > N2XS(FL)2Y 8.7/15(17.5)kV Copper XLPE insulated MDPE cable

N2XS(FL)2Y 8.7/15(17.5)kV Copper XLPE insulated MDPE cable

Application

Medium voltage power cables for distribution networks and generation units, suitable for external installation including direct in ground and in buried cable ducts. UV Resistant.

Construction

Conductor: Class 2 Stranded Circular Compacted Copper
Conductor Screen: Extruded Inner Semi Conductor (Bonded Type)
Insulation: XLPE (Cross-Linked Polyethylene)
Insulation Screen: Extruded Outer Semi Conductor (Strippable Type)
Semi Conductive Water Blocking Tape
Screen: Copper Wires and Open Helix Copper Tape
Non-Conductive Water Blocking Tape
Tape: Aluminum Tape
Outer Sheath: MDPE (Medium Density Polyethylene)

Characteristics

Voltage Rating Uo/U(Um): 8.7/15(17.5)kV
Maximum Conductor Operating Temperature: 90℃
Maximum Screen Operating Temperature: 80℃
Maximum Conductor Temperature During S.C.: 250℃

Specification

IEC 60502-2 Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 1kV (Um=1.2kV) up to 30kV (Um=36kV)–Part 2: Cables for Rated Voltages of 6kV (Um=7.2kV) and 30kV (Um=36kV)

IEC 60228 Conductors of insulated cables: specifies the nominal cross-sectional areas, in the range 0,5 mm²to 3500 mm², for conductors in electric power cables and cords of a wide range of types.

Send Email

Chat Now

No.of cores and Nominal cross sectional area	Conductor Diameter	Nominal Insulation Thickness	Minimum Insulation Thickness	Nominal Sheath Thickness	Approx. Overall Diameter	Approx. Weight	Max. DC Resistance of conductor at 20°C
No. x mm²	mm	mm	mm	mm	mm	Kg/km	Ω/km
1×50/16	9	4	3.5	1.7	27.3	1065	0.387
1×70/16	10.5	4	3.5	1.8	29	1295	0.268
1×95/16	12	4	3.5	1.9	30.6	1560	0.193
1×120/16	13	4	3.5	2	32.4	1825	0.153
1×150/25	15.3	4.5	3.95	2	34	2195	0.124
1×185/25	16.5	4.5	3.95	2.1	35.5	2565	0.0991
1×240/25	19.4	4.5	3.95	2.2	38	3125	0.0754
1×300/25	21.5	4.5	3.95	2.3	40	3750	0.0601
1×400/35	24	5	4.4	2.4	36.5	3795	0.047
1×500/35	27	5	4.4	2.5	39.5	4550	0.0366
1×630/35	30.7	5	4.4	2.6	44	5825	0.0283
1×800/35	32.5	5	4.4	2.7	48	7095	0.0221

Application and case display

FAQ

How Do Water-Blocking Cables Work?

How do you calculate the minimum bending radius of cables?

What are the weight limits for different types of packages?

What is the minimum order quantity for the product?

What is the purpose of a metallic shield in MV and HV cables?

Longitudinal Water Blocking vs. Lateral Water Blocking?

How Do Water-Blocking Cables Work?

Water-blocking cables are essential for ensuring reliable operation in environments with high levels of moisture or frequent water contact. These cables employ water-blocking techniques to effectively prevent water ingress, protecting them from damage and prolonging their lifespan.

How do you calculate the minimum bending radius of cables?

The bend radius refers to the curved shape in which an electrical cable can be bent or curved without sustaining damage. To determine the minimum bend radius for cables, apply the following formula: Minimum Bend Radius = Cable Outer Diameter×Cable Multiplier. For example, if the outer diameter of a cable is 20mm, its minimum bending radius would be 20mm×6 = 120mm. Conversely, if an armored cable has an outer diameter of 30mm, its minimum bending radius would be 30mm×12 = 360mm.

What are the weight limits for different types of packages?

The weight limit for a wooden drum or steel wooden is 5,000 kg, and for a steel drum, it is 10,000 kg.

What is the minimum order quantity for the product?

The minimum order quantity for low and medium voltage cables is 200 meters, whereas for high voltage cables, it is 2000 meters. Should the order quantity fall below the MOQ, however, if the factory has stock, we can still supply it.

What is the purpose of a metallic shield in MV and HV cables?

Medium and high voltage power cables, typically those in circuits exceeding 2kV, usually feature a shield layer made of copper or aluminum tape. Similar to their use in low voltage cables, metallic wires and tapes are employed to prevent electromagnetic interference. These shields effectively neutralize or significantly diminish the field currents surrounding the conductor or core. The capacitive and inductive charging currents induced under normal operating conditions are subsequently grounded by the metallic screen.

Longitudinal Water Blocking vs. Lateral Water Blocking?

A longitudinally water blocking cable is designed with a barrier to prevent the spread of moisture along its length. Longitudinal water blocking stops water from migrating along the cable's core, typically between the conductor strands, insulation layers, or metallic screens. Lateral water blocking ensures that water cannot penetrate the cable in the event that the sheathing is pierced or damaged. Radial water blocking prevents water from penetrating the cable's outer sheath or insulation layers, thereby stopping it from entering the cable structure entirely. Longitudinal water blocking can be achieved through various methods, including the application of water-blocking tapes and powders. These are frequently located on either side of a metallic screen and conductor. Lateral water blocking is typically accomplished by applying a layer of aluminum/polyester tape to the underside of the outer sheath.

Get in Touch With Our Team

We're here to answer any questions you may have about our products, services, or technical specifications.

Tel: +86-371-63395670

Email: info@starsunelectric.com

Address: No. 1207, Building B, No. 96 Kangning Street, Zhengdong New District, Zhengzhou, China

N2XS(FL)2Y 8.7/15(17.5)kV Copper XLPE insulated MDPE cable

Product Parameters

Application and case display

FAQ

Related Products

N2XS(FL)2Y 6/10 (12) kV Copper XLPE insulated MDPE Cable

Get in Touch With Our Team