Home > Low Voltage Power Cables > NA2XY 0.6/1kV Aluminum XLPE insulated Cable

NA2XY 0.6/1kV Aluminum XLPE insulated Cable

Application

These power cables are used for electricity supply in low voltage installation systems. They are well adapted to underground use in industrial applications with an additional mechanical protection. These cables can be fixed on cable trays, within conduits or fixed to walls.

Construction

Conductor: Aluminum, class 1 or class 2, solid or stranded, circular or circular compacted conductors
Insulation: Cross-linked polyethylene XLPE
Outer sheath: Polyvinyl chloride PVC

Main Characteristics

Good electrical and mechanical properties.
Cross-linked polyethylene insulation allows greater power capacity under any operating condition, minimum dielectric losses, high insulation resistance.
The PVC outer sheath allows an adequate resistance to oil and abrasion.

Specification

IEC 60228 Conductors of insulate cables
IEC 60502-1 Power cables with extruded insulation and their accessories for rated voltages from 1 kV(Um=1.2 kV) up to 30 kV(Um=36 kV) – Part 1:Cables for rated voltages of 1 kV (Um=1.2 kV) and 3 kV(Um=3.6 kV)

Send Email

Chat Now

No. of cores and nominal cross section	Min. Number of wires	Nominal insulation thickness	Nominal sheath thickness	Approx. overall Diameter	Approx. weight	Max. DC resistance of conductor at 20℃
No.×mm²	No.	mm	mm	mm	kg/km	Ω/km
1×2.5	1	0.7	1.4	6	41	12.1
1×4	1	0.7	1.4	6.4	49	7.41
1×6	1	0.7	1.4	6.9	59	4.61
1×10	6	0.7	1.4	8.2	77	3.08
1×16	6	0.7	1.4	9	101	1.91
1×25	6	0.9	1.4	10.6	143	1.2
1×35	6	0.9	1.4	11.6	177	0.868
1×50	6	1	1.4	13.1	224	0.641
1×70	12	1.1	1.4	14.8	300	0.443
1×95	15	1.1	1.5	16.8	394	0.32
1×120	15	1.2	1.5	18.4	476	0.253
1×150	15	1.4	1.6	20.5	587	0.206
1×185	30	1.6	1.6	22.5	717	0.164
1×240	30	1.7	1.7	25.2	918	0.125
1×300	30	1.8	1.8	27.8	1130	0.1
1×400	53	2	1.9	31.2	1431	0.0778
1×500	53	2.2	2	34.7	1794	0.0605
1×630	53	2.4	2.2	39.2	2292	0.0469

Application and case display

FAQ

Why do cable prices vary significantly among suppliers within the same region?

What is the validity period for the offer of cable?

What is the minimum order quantity for the product?

Is a flame-retardant cable also fire resistant?

What is the purpose of a metallic shield in MV and HV cables?

What is the validity period for the offer of cable?

Typically, the offer is valid for 7 to 30 days, and the price will be adjusted according to the cost of raw materials and the exchange rate.

What temperature can high-temperature resistant cables reach, and what are their application scenarios?

High-temperature resistant cables are engineered to function within a wide temperature range, spanning from -50°C to +260°C, depending on the cable's specific type and construction. Silicone rubber-insulated cables can withstand temperatures up to 180°C, whereas fluoroplastic insulated cables are designed to endure temperatures as high as 200°C to 260°C over extended periods. They are widely used in steel metallurgy, power, petrochemicals, aerospace, and industrial kilns for power transmission and equipment control in high-heat environments.

Is a flame-retardant cable also fire resistant?

No. A flame-retardant cable is not the same as a fire-resistant cable. A flame-retardant cable is designed to restrict the spread of fire by inhibiting combustion. Fire-resistant cables, on the other hand, maintain circuit integrity and continue to function for a specified time under defined fire conditions.

What is the service life of cables?

The design life of power cables is typically 20 to 30 years; however, this can vary significantly based on factors such as installation, environmental conditions, and the quality of the cable.

Armored vs. Unarmored Cables?

Armored cables are ideal for direct burial and laying underground, offering protection against environmental factors. Unarmored cables are unsuitable for burial or use in other challenging applications and installations.